Update requirements.txt

plugins/aria2/conf/aria2.conf

@@ -0,0 +1,102 @@
+## 文件保存相关 ##
+
+# 文件的保存路径(可使用绝对路径或相对路径), 默认: 当前启动位置
+dir=/tmp/aria2
+# 设置日志等级
+log-level=error
+# 日志保存路径
+log={$SERVER_PATH}/aria2.log
+# 启用磁盘缓存, 0为禁用缓存, 需1.16以上版本, 默认:16M
+disk-cache=32M
+# 文件预分配方式, 能有效降低磁盘碎片, 默认:prealloc
+# 预分配所需时间: none < falloc ? trunc < prealloc
+# falloc和trunc则需要文件系统和内核支持
+# NTFS建议使用falloc, EXT3/4建议trunc, MAC 下需要注释此项
+#file-allocation=none
+# 断点续传
+continue=true
+
+## 下载连接相关 ##
+
+# 最大同时下载任务数, 运行时可修改, 默认:5
+max-concurrent-downloads=5
+# 同一服务器连接数, 添加时可指定, 默认:1
+max-connection-per-server=10
+# 最小文件分片大小, 添加时可指定, 取值范围1M -1024M, 默认:20M
+# 假定size=10M, 文件为20MiB 则使用两个来源下载; 文件为15MiB 则使用一个来源下载
+min-split-size=10M
+# 单个任务最大线程数, 添加时可指定, 默认:5
+split=128
+# 整体下载速度限制, 运行时可修改, 默认:0
+#max-overall-download-limit=0
+# 单个任务下载速度限制, 默认:0
+#max-download-limit=0
+# 整体上传速度限制, 运行时可修改, 默认:0
+#max-overall-upload-limit=0
+# 单个任务上传速度限制, 默认:0
+#max-upload-limit=0
+# 禁用IPv6, 默认:false
+disable-ipv6=true
+
+## 进度保存相关 ##
+
+# 从会话文件中读取下载任务
+input-file={$SERVER_PATH}/aria2.session
+# 在Aria2退出时保存`错误/未完成`的下载任务到会话文件
+save-session={$SERVER_PATH}/aria2.session
+# 定时保存会话, 0为退出时才保存, 需1.16.1以上版本, 默认:0
+#save-session-interval=60
+
+## RPC相关设置 ##
+
+# 启用RPC, 默认:false
+enable-rpc=true
+# 允许所有来源, 默认:false
+rpc-allow-origin-all=true
+# 允许非外部访问, 默认:false
+rpc-listen-all=true
+# 事件轮询方式, 取值:[epoll, kqueue, port, poll, select], 不同系统默认值不同
+#event-poll=select
+# RPC监听端口, 端口被占用时可以修改, 默认:6800
+rpc-listen-port=6800
+# 设置的RPC授权令牌, v1.18.4新增功能, 取代 --rpc-user 和 --rpc-passwd 选项
+#rpc-secret=sark
+# 设置的RPC访问用户名, 此选项新版已废弃, 建议改用 --rpc-secret 选项
+#rpc-user=<USER>
+# 设置的RPC访问密码, 此选项新版已废弃, 建议改用 --rpc-secret 选项
+#rpc-passwd=<PASSWD>
+
+## BT/PT下载相关 ##
+
+# 当下载的是一个种子(以.torrent结尾)时, 自动开始BT任务, 默认:true
+#follow-torrent=true
+# BT监听端口, 当端口被屏蔽时使用, 默认:6881-6999
+listen-port=51413
+# 单个种子最大连接数, 默认:55
+#bt-max-peers=55
+# 打开DHT功能, PT需要禁用, 默认:true
+enable-dht=false
+# 打开IPv6 DHT功能, PT需要禁用
+#enable-dht6=false
+# DHT网络监听端口, 默认:6881-6999
+#dht-listen-port=6881-6999
+# 本地节点查找, PT需要禁用, 默认:false
+#bt-enable-lpd=false
+# 种子交换, PT需要禁用, 默认:true
+enable-peer-exchange=false
+# 每个种子限速, 对少种的PT很有用, 默认:50K
+#bt-request-peer-speed-limit=50K
+# 客户端伪装, PT需要
+peer-id-prefix=-TR2770-
+user-agent=Transmission/2.77
+# 当种子的分享率达到这个数时, 自动停止做种, 0为一直做种, 默认:1.0
+seed-ratio=0
+# 强制保存会话, 即使任务已经完成, 默认:false
+# 较新的版本开启后会在任务完成后依然保留.aria2文件
+#force-save=false
+# BT校验相关, 默认:true
+#bt-hash-check-seed=true
+# 继续之前的BT任务时, 无需再次校验, 默认:false
+bt-seed-unverified=true
+# 保存磁力链接元数据为种子文件(.torrent文件), 默认:false
+bt-save-metadata=true

plugins/aria2/index.html

@@ -0,0 +1,19 @@
+<div class="bt-form">
+	<div class="bt-w-main">
+		<div class="bt-w-menu">
+			<p class="bgw" onclick="pluginService('aria2');">服务</p>
+			<p onclick="pluginInitD('aria2');">自启动</p>
+			<p onclick="pluginConfig('aria2');">配置修改</p>
+			<p onclick="pluginLogs('aria2','','run_log');">运行日志</p>
+			<p onclick="readme();">说明</p>
+		</div>
+		<div class="bt-w-con pd15">
+			<div class="soft-man-con"></div>
+		</div>
+	</div>
+</div>
+<script type="text/javascript">
+$.getScript( "/plugins/file?name=aria2&f=js/aria2.js", function(){
+	pluginService('aria2');
+});
+</script>

plugins/aria2/index.py

@@ -0,0 +1,211 @@
+# coding:utf-8
+
+import sys
+import io
+import os
+import time
+import shutil
+
+sys.path.append(os.getcwd() + "/class/core")
+import mw
+
+app_debug = False
+if mw.isAppleSystem():
+    app_debug = True
+
+
+def getPluginName():
+    return 'aria2'
+
+
+def getPluginDir():
+    return mw.getPluginDir() + '/' + getPluginName()
+
+
+def getServerDir():
+    return mw.getServerDir() + '/' + getPluginName()
+
+
+def getInitDTpl():
+    path = getPluginDir() + "/init.d/aria2.tpl"
+    return path
+
+
+def getArgs():
+    args = sys.argv[2:]
+    tmp = {}
+    args_len = len(args)
+
+    if args_len == 1:
+        t = args[0].strip('{').strip('}')
+        t = t.split(':')
+        tmp[t[0]] = t[1]
+    elif args_len > 1:
+        for i in range(len(args)):
+            t = args[i].split(':')
+            tmp[t[0]] = t[1]
+
+    return tmp
+
+
+def initDreplace():
+
+    file_tpl = getInitDTpl()
+    service_path = os.path.dirname(os.getcwd())
+
+    initD_path = getServerDir() + '/init.d'
+
+    file_bin = initD_path + '/' + getPluginName()
+    if not os.path.exists(initD_path):
+        os.mkdir(initD_path)
+
+        # initd replace
+        content = mw.readFile(file_tpl)
+        content = content.replace('{$SERVER_PATH}', service_path)
+        mw.writeFile(file_bin, content)
+        mw.execShell('chmod +x ' + file_bin)
+
+    aria2_path = getServerDir() + '/aria2'
+    mw.execShell('mkdir -p /tmp/download')
+    if not os.path.exists(aria2_path):
+
+        mw.execShell('mkdir -p ' + aria2_path)
+        mw.execShell('touch ' + aria2_path + '/aria2.session')
+
+        path = getPluginDir() + "/conf/aria2.conf"
+        content = mw.readFile(path)
+        content = content.replace('{$SERVER_PATH}', aria2_path)
+
+        mw.writeFile(aria2_path + '/aria2.conf', content)
+
+    return file_bin
+
+
+def checkArgs(data, ck=[]):
+    for i in range(len(ck)):
+        if not ck[i] in data:
+            return (False, mw.returnJson(False, '参数:(' + ck[i] + ')没有!'))
+    return (True, mw.returnJson(True, 'ok'))
+
+
+def status():
+    cmd = "ps -ef|grep aria2 |grep -v grep | grep -v 'mdserver-web'| awk '{print $2}'"
+    data = mw.execShell(cmd)
+    if data[0] == '':
+        return 'stop'
+    return 'start'
+
+
+def start():
+
+    file = initDreplace()
+    data = mw.execShell(file + ' start')
+
+    if data[1] == '':
+        return 'ok'
+    return data[1]
+
+
+def stop():
+    file = initDreplace()
+    data = mw.execShell(file + ' stop')
+    # print data
+    if data[1] == '':
+        return 'ok'
+    return data[1]
+
+
+def restart():
+    file = initDreplace()
+    data = mw.execShell(file + ' reload')
+    if data[1] == '':
+        return 'ok'
+    return data[1]
+
+
+def reload():
+    file = initDreplace()
+    data = mw.execShell(file + ' reload')
+    if data[1] == '':
+        return 'ok'
+    return data[1]
+
+
+def getPathFile():
+    if mw.isAppleSystem():
+        user = mw.execShell(
+            "who | sed -n '2, 1p' |awk '{print $1}'")[0].strip()
+        return '/Users/' + user + '/.aria2/aria2.conf'
+    return getServerDir() + '/aria2/aria2.conf'
+
+
+def getInitDFile():
+    if app_debug:
+        return '/tmp/' + getPluginName()
+    return '/etc/init.d/' + getPluginName()
+
+
+def initdStatus():
+    if not app_debug:
+        if mw.isAppleSystem():
+            return "Apple Computer does not support"
+    initd_bin = getInitDFile()
+    if os.path.exists(initd_bin):
+        return 'ok'
+    return 'fail'
+
+
+def initdInstall():
+    source_bin = initDreplace()
+    initd_bin = getInitDFile()
+    shutil.copyfile(source_bin, initd_bin)
+    mw.execShell('chmod +x ' + initd_bin)
+
+    if not app_debug:
+        mw.execShell('chkconfig --add ' + getPluginName())
+    return 'ok'
+
+
+def initdUinstall():
+    if not app_debug:
+        mw.execShell('chkconfig --del ' + getPluginName())
+
+    initd_bin = getInitDFile()
+
+    if os.path.exists(initd_bin):
+        os.remove(initd_bin)
+    return 'ok'
+
+
+def getLog():
+    if mw.isAppleSystem():
+        user = mw.execShell(
+            "who | sed -n '2, 1p' |awk '{print $1}'")[0].strip()
+        return '/Users/' + user + '/.aria2/aria2.log'
+    return getServerDir() + '/aria2/aria2.log'
+
+
+if __name__ == "__main__":
+    func = sys.argv[1]
+    if func == 'status':
+        print status()
+    elif func == 'start':
+        print start()
+    elif func == 'stop':
+        print stop()
+    elif func == 'restart':
+        print restart()
+    elif func == 'reload':
+        print reload()
+    elif func == 'conf':
+        print getPathFile()
+    elif func == 'initd_status':
+        print initdStatus()
+    elif func == 'initd_install':
+        print initdInstall()
+    elif func == 'initd_uninstall':
+        print initdUinstall()
+    elif func == 'run_log':
+        print getLog()
+    else:
+        print 'error'

plugins/aria2/info.json

@@ -0,0 +1,15 @@
+{
+	"title":"aria2",
+	"tip":"soft",
+	"name":"aria2",
+	"type":"其他插件",
+	"ps":"一款下载神器",
+	"versions":"1.0",
+	"shell":"install.sh",
+	"checks":"server/aria2",
+	"path": "server/aria2",
+	"author":"midoks",
+	"home":"https://github.com/aria2/aria2",
+	"date":"2020-06-08",
+	"pid": "5"
+}

plugins/aria2/init.d/aria2.tpl

@@ -0,0 +1,49 @@
+#!/bin/sh
+# chkconfig: 2345 55 25
+# description: aria2 Service
+
+### BEGIN INIT INFO
+# Provides:          aria2
+# Required-Start:    $all
+# Required-Stop:     $all
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: starts aria2
+# Description:       starts the MDW-Web
+### END INIT INFO
+
+
+app_start(){
+	# aria2c -D
+	aria2c --daemon --enable-rpc --rpc-listen-all -c -D --conf-path={$SERVER_PATH}/aria2/aria2/aria2.conf
+	echo "aria2 started"
+}
+app_stop(){
+	echo "Stopping ..."
+	arr=`ps -ef | grep "aria2" | grep -v 'grep' | grep -v '/bin/sh'|grep -v 'index.py' | awk '{print $2}'`
+	echo $arr
+	for p in ${arr[@]}
+    do
+		kill -9 $p &>/dev/null
+    done
+	echo "aria2 stopped"
+}
+
+
+case "$1" in
+    start)
+		app_start
+        ;;
+    stop)
+        app_stop
+        ;;
+	restart|reload)
+		app_stop
+		sleep 0.3
+		app_start
+		;;
+    *)
+        echo "Please use start or stop as first argument"
+        ;;
+esac
+

plugins/aria2/install.sh

@@ -0,0 +1,49 @@
+#!/bin/bash
+PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin
+export PATH
+
+curPath=`pwd`
+rootPath=$(dirname "$curPath")
+rootPath=$(dirname "$rootPath")
+serverPath=$(dirname "$rootPath")
+
+
+install_tmp=${rootPath}/tmp/mw_install.pl
+
+SYSOS=`uname`
+
+Install_aria2()
+{
+	isStart=""
+	echo '正在安装脚本文件...' > $install_tmp
+	mkdir -p $serverPath/aria2
+	echo '1.0' > $serverPath/aria2/version.pl
+
+	if [ "Darwin" == "$SYSOS" ];then
+		echo 'macosx unavailable' > $install_tmp
+		find_sh=`which aria2c`
+		if [ "$?" != "0" ];then
+			brew install aria2
+		fi
+	else
+		find_sh=`which aria2c`
+		if [ "$?" != "0" ];then
+			yum install aria2 -y
+		fi
+	fi
+
+	echo 'Install complete' > $install_tmp
+}
+
+Uninstall_aria2()
+{
+	rm -rf $serverPath/aria2
+	echo "Uninstall completed" > $install_tmp
+}
+
+action=$1
+if [ "${1}" == 'install' ];then
+	Install_aria2
+else
+	Uninstall_aria2
+fi

plugins/aria2/js/aria2.js

@@ -0,0 +1,92 @@
+function str2Obj(str){
+    var data = {};
+    kv = str.split('&');
+    for(i in kv){
+        v = kv[i].split('=');
+        data[v[0]] = v[1];
+    }
+    return data;
+}
+
+function lpPost(method,args,callback, title){
+
+    var _args = null; 
+    if (typeof(args) == 'string'){
+        _args = JSON.stringify(str2Obj(args));
+    } else {
+        _args = JSON.stringify(args);
+    }
+
+    var _title = '正在获取...';
+    if (typeof(title) != 'undefined'){
+        _title = title;
+    }
+
+    var loadT = layer.msg(_title, { icon: 16, time: 0, shade: 0.3 });
+    $.post('/plugins/run', {name:'aria2', func:method, args:_args}, function(data) {
+        layer.close(loadT);
+        if (!data.status){
+            layer.msg(data.msg,{icon:0,time:2000,shade: [0.3, '#000']});
+            return;
+        }
+
+        if(typeof(callback) == 'function'){
+            callback(data);
+        }
+    },'json'); 
+}
+
+function lpAsyncPost(method,args){
+    var _args = null; 
+    if (typeof(args) == 'string'){
+        _args = JSON.stringify(str2Obj(args));
+    } else {
+        _args = JSON.stringify(args);
+    }
+
+    var loadT = layer.msg('正在获取...', { icon: 16, time: 0, shade: 0.3 });
+    return syncPost('/plugins/run', {name:'l2tp', func:method, args:_args});
+}
+
+function userList(){
+    lpPost('user_list', '' ,function(data){
+        var rdata = $.parseJSON(data['data']);
+        
+        if (!rdata['status']){
+            layer.msg(rdata.msg,{icon:0,time:2000,shade: [0.3, '#000']});
+            return;
+        }
+        var list = rdata['data'];
+
+        var con = '';
+        con += '<div class="divtable" style="margin-top:5px;"><table class="table table-hover" width="100%" cellspacing="0" cellpadding="0" border="0">';
+        con += '<thead><tr>';
+        con += '<th>用户</th>';
+        con += '<th>密码</th>';
+        con += '<th>操作(<a class="btlink" onclick="addUser()">添加</a>)</th>';
+        con += '</tr></thead>';
+
+        con += '<tbody>';
+
+        for (var i = 0; i < list.length; i++) {
+            con += '<tr>'+
+                '<td>' + list[i]['user']+'</td>' +
+                '<td>' + list[i]['pwd']+'</td>' +
+                '<td><a class="btlink" onclick="modUser(\''+list[i]['user']+'\')">改密</a>|<a class="btlink" onclick="delUser(\''+list[i]['user']+'\')">删除</a></td></tr>';
+        }
+
+        con += '</tbody>';
+        con += '</table></div>';
+
+        $(".soft-man-con").html(con);
+    });
+}
+
+
+
+function readme(){
+    var readme = '<ul class="help-info-text c7">';
+    readme += '<li>使用时，查看对应的端口</li>';
+    readme += '</ul>';
+    $('.soft-man-con').html(readme);
+}

plugins/bbr/info.json

@@ -12,5 +12,5 @@
 	"author":"Google",
 	"home":"https://github.com/google/bbr",
 	"date":"2019-03-29",
-	"pid":"4"
+	"pid":"5"
 }

plugins/memcached/info.json

@@ -4,8 +4,8 @@
 	"name": "memcached",
 	"title": "Memcached",
 	"shell": "install.sh",
-	"versions":["1.5"],
-	"updates":["1.5.12"],
+	"versions":["1.6"],
+	"updates":["1.6.9"],
 	"tip": "soft",
 	"checks": "server/memcached",
 	"path":"server/memcached",

plugins/memcached/install.sh

@@ -16,7 +16,7 @@ Install_mem(){
 	echo '正在安装脚本文件...' > $install_tmp
 
 	if [ ! -f $serverPath/source/memcached.tar.gz ];then
-		wget -O $serverPath/source/memcached.tar.gz http://www.memcached.org/files/memcached-1.5.12.tar.gz
+		wget -O $serverPath/source/memcached.tar.gz http://www.memcached.org/files/memcached-1.6.9.tar.gz
 	fi
 	
 	cd $serverPath/source && tar -zxvf memcached.tar.gz
@@ -25,7 +25,7 @@ Install_mem(){
 	cd $serverPath/source/memcached*
 	./configure --prefix=$serverPath/memcached && make && make install
 
-	echo '1.5' > $serverPath/memcached/version.pl
+	echo '1.6' > $serverPath/memcached/version.pl
 	echo 'install ok' > $install_tmp
 }
 

plugins/mysql/conf/my.cnf

@@ -1,4 +1,5 @@
 [client]
+user = root
 #password	= your_password
 port		= 3306
 socket		= {$SERVER_APP_PATH}/mysql.sock

plugins/mysql/conf/my8.0.cnf

@@ -1,4 +1,5 @@
 [client]
+user = root
 #password	= your_password
 port		= 3306
 socket		= {$SERVER_APP_PATH}/mysql.sock

plugins/op_waf/conf/luawaf.conf

@@ -1,7 +1,7 @@
 lua_shared_dict limit 30m;
 lua_shared_dict drop_ip 30m;
 lua_shared_dict drop_sum 30m;
-lua_package_path "{$WAF_PATH}/lua/?.lua";
+lua_package_path "{$WAF_PATH}/lua/?.lua;{$ROOT_PATH}/openresty/lualib/?.lua;;";
 access_by_lua_file  {$WAF_PATH}/lua/init.lua;
 
 #init_by_lua_file  {$WAF_PATH}/lua/init.lua;

plugins/op_waf/index.py

@@ -172,10 +172,6 @@ def initTotalInfo():
 
 
 def status():
-    initDomainInfo()
-    initSiteInfo()
-    initTotalInfo()
-
     path = getConf()
     if not os.path.exists(path):
         return 'stop'
@@ -199,19 +195,19 @@ def contentReplace(content):
 
 def initDreplace():
 
-    config = getPluginDir() + '/waf/config.json'
-    content = mw.readFile(config)
-    content = json.loads(content)
-    content['reqfile_path'] = mw.getServerDir(
-    ) + "/openresty/nginx/conf/waf/html"
-    mw.writeFile(config, mw.getJson(content))
-
     path = mw.getServerDir() + "/openresty/nginx/conf"
     if not os.path.exists(path + '/waf'):
         sdir = getPluginDir() + '/waf'
         cmd = 'cp -rf ' + sdir + ' ' + path
         mw.execShell(cmd)
 
+    config = mw.getServerDir() + '/openresty/nginx/conf/waf/config.json'
+    content = mw.readFile(config)
+    content = json.loads(content)
+    content['reqfile_path'] = mw.getServerDir(
+    ) + "/openresty/nginx/conf/waf/html"
+    mw.writeFile(config, mw.getJson(content))
+
     config = mw.getServerDir() + "/openresty/nginx/conf/waf/lua/init.lua"
     content = mw.readFile(config)
     content = contentReplace(content)
@@ -223,6 +219,10 @@ def initDreplace():
     content = contentReplace(content)
     mw.writeFile(waf_conf, content)
 
+    initDomainInfo()
+    initSiteInfo()
+    initTotalInfo()
+
 
 def start():
     initDreplace()
@@ -669,7 +669,7 @@ def setCcConf():
 
 
 def setSiteCcConf():
-    return mw.returnJson(True, '设置成功-?!', [])
+    return mw.returnJson(False, '暂未开发!', [])
 
 
 def saveScanRule():
@@ -986,4 +986,4 @@ if __name__ == "__main__":
     elif func == 'waf_site':
         print getWafSite()
     else:
-        print 'error'
+        print('error')

plugins/op_waf/info.json

@@ -1,5 +1,5 @@
 {
-	"title":"OP防火墙[DEV]",
+	"title":"OP防火墙",
 	"tip":"soft",
 	"name":"op_waf",
 	"type":"其他插件",

plugins/op_waf/waf/config.json

@@ -1 +1 @@
-{"reqfile_path":"/Users/midoks/Desktop/fwww/server/openresty/nginx/conf/waf/html","retry":{"retry_time":180,"is_open_global":0,"retry":6,"retry_cycle":60},"log":true,"scan":{"status":444,"ps":"过滤常见扫描测试工具的渗透测试","open":true,"reqfile":""},"cc":{"status":444,"ps":"过虑CC攻击","limit":120,"endtime":300,"open":true,"reqfile":"","cycle":60},"get":{"status":403,"ps":"过滤uri、uri参数中常见sql注入、xss等攻击","open":true,"reqfile":"get.html"},"log_save":30,"user-agent":{"status":403,"ps":"通常用于过滤浏览器、蜘蛛及一些自动扫描器","open":true,"reqfile":"user_agent.html"},"other":{"status":403,"ps":"其它非通用过滤","reqfile":"other.html"},"cookie":{"status":403,"ps":"过滤利用Cookie发起的渗透攻击","open":true,"reqfile":"cookie.html"},"logs_path":"/www/wwwlogs/btwaf","post":{"status":403,"ps":"过滤POST参数中常见sql注入、xss等攻击","open":true,"reqfile":"post.html"},"open":true}
+{"reqfile_path": "{$WAF_PATH}/html", "retry": {"retry_time": 180, "is_open_global": 0, "retry": 6, "retry_cycle": 60}, "log": true, "scan": {"status": 444, "ps": "\u8fc7\u6ee4\u5e38\u89c1\u626b\u63cf\u6d4b\u8bd5\u5de5\u5177\u7684\u6e17\u900f\u6d4b\u8bd5", "open": true, "reqfile": ""}, "cc": {"status": 444, "ps": "\u8fc7\u8651CC\u653b\u51fb", "limit": 120, "endtime": 300, "open": true, "reqfile": "", "cycle": 60}, "get": {"status": 403, "ps": "\u8fc7\u6ee4uri\u3001uri\u53c2\u6570\u4e2d\u5e38\u89c1sql\u6ce8\u5165\u3001xss\u7b49\u653b\u51fb", "open": true, "reqfile": "get.html"}, "log_save": 30, "user-agent": {"status": 403, "ps": "\u901a\u5e38\u7528\u4e8e\u8fc7\u6ee4\u6d4f\u89c8\u5668\u3001\u8718\u86db\u53ca\u4e00\u4e9b\u81ea\u52a8\u626b\u63cf\u5668", "open": true, "reqfile": "user_agent.html"}, "other": {"status": 403, "ps": "\u5176\u5b83\u975e\u901a\u7528\u8fc7\u6ee4", "reqfile": "other.html"}, "cookie": {"status": 403, "ps": "\u8fc7\u6ee4\u5229\u7528Cookie\u53d1\u8d77\u7684\u6e17\u900f\u653b\u51fb", "open": true, "reqfile": "cookie.html"}, "logs_path": "/www/wwwlogs/btwaf", "post": {"status": 403, "ps": "\u8fc7\u6ee4POST\u53c2\u6570\u4e2d\u5e38\u89c1sql\u6ce8\u5165\u3001xss\u7b49\u653b\u51fb", "open": true, "reqfile": "post.html"}, "open": true}

plugins/op_waf/waf/lua/init.lua

@@ -1,7 +1,7 @@
 
-local cpath = "/Users/midoks/Desktop/fwww/server/openresty/nginx/conf/waf/"
-local rpath = "/Users/midoks/Desktop/fwww/server/openresty/nginx/conf/waf/rule/"
-local logdir = "/Users/midoks/Desktop/fwww/wwwlogs/waf/"
+local cpath = "{$WAF_PATH}/"
+local rpath = "{$WAF_PATH}/rule/"
+local logdir = "{$ROOT_PATH}/wwwlogs/waf/"
 local json = require "cjson"
 local ngx_match = ngx.re.find
 

plugins/php/versions/56/openssl.sh

@@ -0,0 +1,90 @@
+#!/bin/bash
+PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin
+export PATH
+
+curPath=`pwd`
+
+rootPath=$(dirname "$curPath")
+rootPath=$(dirname "$rootPath")
+rootPath=$(dirname "$rootPath")
+rootPath=$(dirname "$rootPath")
+serverPath=$(dirname "$rootPath")
+sourcePath=${serverPath}/source/php
+
+actionType=$1
+version=$2
+
+LIBNAME=openssl
+LIBV=0
+
+extFile=$serverPath/php/${version}/lib/php/extensions/no-debug-non-zts-20131226/${LIBNAME}.so
+
+sysName=`uname`
+if [ "$sysName" == "Darwin" ];then
+	BAK='_bak'
+else
+	BAK=''
+fi
+
+Install_lib()
+{
+
+	isInstall=`cat $serverPath/php/$version/etc/php.ini|grep "${LIBNAME}.so"`
+	if [ "${isInstall}" != "" ];then
+		echo "php-$version 已安装${LIBNAME},请选择其它版本!"
+		return
+	fi
+	
+	if [ ! -f "$extFile" ];then
+
+		cd $sourcePath/php${version}/ext/${LIBNAME}
+
+		if [ ! -f "config.m4" ];then
+			mv config0.m4 config.m4
+		fi
+		
+		$serverPath/php/$version/bin/phpize
+		./configure --with-php-config=$serverPath/php/$version/bin/php-config
+		make clean && make && make install && make clean
+		
+	fi
+
+    echo "" >> $serverPath/php/$version/etc/php.ini
+	echo "[${LIBNAME}]" >> $serverPath/php/$version/etc/php.ini
+	echo "extension=${LIBNAME}.so" >> $serverPath/php/$version/etc/php.ini
+	
+	$serverPath/php/init.d/php$version reload
+	echo '==========================================================='
+	echo 'successful!'
+}
+
+
+Uninstall_lib()
+{
+	if [ ! -f "$serverPath/php/$version/bin/php-config" ];then
+		echo "php-$version 未安装,请选择其它版本!"
+		return
+	fi
+	
+	if [ ! -f "$extFile" ];then
+		echo "php-$version 未安装${LIBNAME},请选择其它版本!"
+		return
+	fi
+	
+	echo $serverPath/php/$version/etc/php.ini
+	sed -i $BAK "/${LIBNAME}.so/d" $serverPath/php/$version/etc/php.ini
+	sed -i $BAK "/${LIBNAME}/d" $serverPath/php/$version/etc/php.ini
+		
+	rm -f $extFile
+	$serverPath/php/init.d/php$version reload
+	echo '==============================================='
+	echo 'successful!'
+}
+
+
+
+if [ "$actionType" == 'install' ];then
+	Install_lib
+elif [ "$actionType" == 'uninstall' ];then
+	Uninstall_lib
+fi

plugins/php/versions/71/mcrypt.sh

@@ -0,0 +1,87 @@
+#!/bin/bash
+PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin
+export PATH
+
+curPath=`pwd`
+
+rootPath=$(dirname "$curPath")
+rootPath=$(dirname "$rootPath")
+rootPath=$(dirname "$rootPath")
+rootPath=$(dirname "$rootPath")
+serverPath=$(dirname "$rootPath")
+sourcePath=${serverPath}/source/php
+
+actionType=$1
+version=$2
+
+LIBNAME=mcrypt
+LIBV=0
+
+extFile=$serverPath/php/${version}/lib/php/extensions/no-debug-non-zts-20160303/${LIBNAME}.so
+
+sysName=`uname`
+if [ "$sysName" == "Darwin" ];then
+	BAK='_bak'
+else
+	BAK=''
+fi
+
+Install_lib()
+{
+
+	isInstall=`cat $serverPath/php/$version/etc/php.ini|grep "${LIBNAME}.so"`
+	if [ "${isInstall}" != "" ];then
+		echo "php-$version 已安装${LIBNAME},请选择其它版本!"
+		return
+	fi
+	
+	if [ ! -f "$extFile" ];then
+
+		cd $sourcePath/php${version}/ext/${LIBNAME}
+
+
+		$serverPath/php/$version/bin/phpize
+		./configure --with-php-config=$serverPath/php/$version/bin/php-config
+		make clean && make && make install && make clean
+		
+	fi
+
+    echo "" >> $serverPath/php/$version/etc/php.ini
+	echo "[${LIBNAME}]" >> $serverPath/php/$version/etc/php.ini
+	echo "extension=${LIBNAME}.so" >> $serverPath/php/$version/etc/php.ini
+	
+	$serverPath/php/init.d/php$version reload
+	echo '==========================================================='
+	echo 'successful!'
+}
+
+
+Uninstall_lib()
+{
+	if [ ! -f "$serverPath/php/$version/bin/php-config" ];then
+		echo "php-$version 未安装,请选择其它版本!"
+		return
+	fi
+	
+	if [ ! -f "$extFile" ];then
+		echo "php-$version 未安装${LIBNAME},请选择其它版本!"
+		return
+	fi
+	
+	echo $serverPath/php/$version/etc/php.ini
+	sed -i $BAK "/${LIBNAME}.so/d" $serverPath/php/$version/etc/php.ini
+	sed -i $BAK "/${LIBNAME}/d" $serverPath/php/$version/etc/php.ini
+		
+	rm -f $extFile
+	$serverPath/php/init.d/php$version reload
+	echo '==============================================='
+	echo 'successful!'
+}
+
+
+
+if [ "$actionType" == 'install' ];then
+	Install_lib
+elif [ "$actionType" == 'uninstall' ];then
+	Uninstall_lib
+fi

plugins/php/versions/71/openssl.sh

@@ -0,0 +1,90 @@
+#!/bin/bash
+PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin
+export PATH
+
+curPath=`pwd`
+
+rootPath=$(dirname "$curPath")
+rootPath=$(dirname "$rootPath")
+rootPath=$(dirname "$rootPath")
+rootPath=$(dirname "$rootPath")
+serverPath=$(dirname "$rootPath")
+sourcePath=${serverPath}/source/php
+
+actionType=$1
+version=$2
+
+LIBNAME=openssl
+LIBV=0
+
+extFile=$serverPath/php/${version}/lib/php/extensions/no-debug-non-zts-20160303/${LIBNAME}.so
+
+sysName=`uname`
+if [ "$sysName" == "Darwin" ];then
+	BAK='_bak'
+else
+	BAK=''
+fi
+
+Install_lib()
+{
+
+	isInstall=`cat $serverPath/php/$version/etc/php.ini|grep "${LIBNAME}.so"`
+	if [ "${isInstall}" != "" ];then
+		echo "php-$version 已安装${LIBNAME},请选择其它版本!"
+		return
+	fi
+	
+	if [ ! -f "$extFile" ];then
+
+		cd $sourcePath/php${version}/ext/${LIBNAME}
+
+		if [ ! -f "config.m4" ];then
+			mv config0.m4 config.m4
+		fi
+		
+		$serverPath/php/$version/bin/phpize
+		./configure --with-php-config=$serverPath/php/$version/bin/php-config
+		make clean && make && make install && make clean
+		
+	fi
+
+    echo "" >> $serverPath/php/$version/etc/php.ini
+	echo "[${LIBNAME}]" >> $serverPath/php/$version/etc/php.ini
+	echo "extension=${LIBNAME}.so" >> $serverPath/php/$version/etc/php.ini
+	
+	$serverPath/php/init.d/php$version reload
+	echo '==========================================================='
+	echo 'successful!'
+}
+
+
+Uninstall_lib()
+{
+	if [ ! -f "$serverPath/php/$version/bin/php-config" ];then
+		echo "php-$version 未安装,请选择其它版本!"
+		return
+	fi
+	
+	if [ ! -f "$extFile" ];then
+		echo "php-$version 未安装${LIBNAME},请选择其它版本!"
+		return
+	fi
+	
+	echo $serverPath/php/$version/etc/php.ini
+	sed -i $BAK "/${LIBNAME}.so/d" $serverPath/php/$version/etc/php.ini
+	sed -i $BAK "/${LIBNAME}/d" $serverPath/php/$version/etc/php.ini
+		
+	rm -f $extFile
+	$serverPath/php/init.d/php$version reload
+	echo '==============================================='
+	echo 'successful!'
+}
+
+
+
+if [ "$actionType" == 'install' ];then
+	Install_lib
+elif [ "$actionType" == 'uninstall' ];then
+	Uninstall_lib
+fi

plugins/php/versions/72/install.sh

@@ -11,7 +11,7 @@ sysName=`uname`
 install_tmp=${rootPath}/tmp/mw_install.pl
 
 
-version=7.2.32
+version=7.2.34
 PHP_VER=72
 Install_php()
 {

plugins/php/versions/72/mcrypt.sh

@@ -0,0 +1,87 @@
+#!/bin/bash
+PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin
+export PATH
+
+curPath=`pwd`
+
+rootPath=$(dirname "$curPath")
+rootPath=$(dirname "$rootPath")
+rootPath=$(dirname "$rootPath")
+rootPath=$(dirname "$rootPath")
+serverPath=$(dirname "$rootPath")
+sourcePath=${serverPath}/source/php
+
+actionType=$1
+version=$2
+
+LIBNAME=mcrypt
+LIBV=0
+
+extFile=$serverPath/php/${version}/lib/php/extensions/no-debug-non-zts-20170718/${LIBNAME}.so
+
+sysName=`uname`
+if [ "$sysName" == "Darwin" ];then
+	BAK='_bak'
+else
+	BAK=''
+fi
+
+Install_lib()
+{
+
+	isInstall=`cat $serverPath/php/$version/etc/php.ini|grep "${LIBNAME}.so"`
+	if [ "${isInstall}" != "" ];then
+		echo "php-$version 已安装${LIBNAME},请选择其它版本!"
+		return
+	fi
+	
+	if [ ! -f "$extFile" ];then
+
+		cd $sourcePath/php${version}/ext/${LIBNAME}
+
+
+		$serverPath/php/$version/bin/phpize
+		./configure --with-php-config=$serverPath/php/$version/bin/php-config
+		make clean && make && make install && make clean
+		
+	fi
+
+    echo "" >> $serverPath/php/$version/etc/php.ini
+	echo "[${LIBNAME}]" >> $serverPath/php/$version/etc/php.ini
+	echo "extension=${LIBNAME}.so" >> $serverPath/php/$version/etc/php.ini
+	
+	$serverPath/php/init.d/php$version reload
+	echo '==========================================================='
+	echo 'successful!'
+}
+
+
+Uninstall_lib()
+{
+	if [ ! -f "$serverPath/php/$version/bin/php-config" ];then
+		echo "php-$version 未安装,请选择其它版本!"
+		return
+	fi
+	
+	if [ ! -f "$extFile" ];then
+		echo "php-$version 未安装${LIBNAME},请选择其它版本!"
+		return
+	fi
+	
+	echo $serverPath/php/$version/etc/php.ini
+	sed -i $BAK "/${LIBNAME}.so/d" $serverPath/php/$version/etc/php.ini
+	sed -i $BAK "/${LIBNAME}/d" $serverPath/php/$version/etc/php.ini
+		
+	rm -f $extFile
+	$serverPath/php/init.d/php$version reload
+	echo '==============================================='
+	echo 'successful!'
+}
+
+
+
+if [ "$actionType" == 'install' ];then
+	Install_lib
+elif [ "$actionType" == 'uninstall' ];then
+	Uninstall_lib
+fi

plugins/php/versions/72/openssl.sh

@@ -0,0 +1,90 @@
+#!/bin/bash
+PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin
+export PATH
+
+curPath=`pwd`
+
+rootPath=$(dirname "$curPath")
+rootPath=$(dirname "$rootPath")
+rootPath=$(dirname "$rootPath")
+rootPath=$(dirname "$rootPath")
+serverPath=$(dirname "$rootPath")
+sourcePath=${serverPath}/source/php
+
+actionType=$1
+version=$2
+
+LIBNAME=openssl
+LIBV=0
+
+extFile=$serverPath/php/${version}/lib/php/extensions/no-debug-non-zts-20170718/${LIBNAME}.so
+
+sysName=`uname`
+if [ "$sysName" == "Darwin" ];then
+	BAK='_bak'
+else
+	BAK=''
+fi
+
+Install_lib()
+{
+
+	isInstall=`cat $serverPath/php/$version/etc/php.ini|grep "${LIBNAME}.so"`
+	if [ "${isInstall}" != "" ];then
+		echo "php-$version 已安装${LIBNAME},请选择其它版本!"
+		return
+	fi
+	
+	if [ ! -f "$extFile" ];then
+
+		cd $sourcePath/php${version}/ext/${LIBNAME}
+
+		if [ ! -f "config.m4" ];then
+			mv config0.m4 config.m4
+		fi
+		
+		$serverPath/php/$version/bin/phpize
+		./configure --with-php-config=$serverPath/php/$version/bin/php-config
+		make clean && make && make install && make clean
+		
+	fi
+
+    echo "" >> $serverPath/php/$version/etc/php.ini
+	echo "[${LIBNAME}]" >> $serverPath/php/$version/etc/php.ini
+	echo "extension=${LIBNAME}.so" >> $serverPath/php/$version/etc/php.ini
+	
+	$serverPath/php/init.d/php$version reload
+	echo '==========================================================='
+	echo 'successful!'
+}
+
+
+Uninstall_lib()
+{
+	if [ ! -f "$serverPath/php/$version/bin/php-config" ];then
+		echo "php-$version 未安装,请选择其它版本!"
+		return
+	fi
+	
+	if [ ! -f "$extFile" ];then
+		echo "php-$version 未安装${LIBNAME},请选择其它版本!"
+		return
+	fi
+	
+	echo $serverPath/php/$version/etc/php.ini
+	sed -i $BAK "/${LIBNAME}.so/d" $serverPath/php/$version/etc/php.ini
+	sed -i $BAK "/${LIBNAME}/d" $serverPath/php/$version/etc/php.ini
+		
+	rm -f $extFile
+	$serverPath/php/init.d/php$version reload
+	echo '==============================================='
+	echo 'successful!'
+}
+
+
+
+if [ "$actionType" == 'install' ];then
+	Install_lib
+elif [ "$actionType" == 'uninstall' ];then
+	Uninstall_lib
+fi

plugins/php/versions/74/install.sh

@@ -11,7 +11,7 @@ sysName=`uname`
 install_tmp=${rootPath}/tmp/mw_install.pl
 
 
-version=7.4.15
+version=7.4.16
 PHP_VER=74
 Install_php()
 {

plugins/php/versions/80/install.sh

@@ -11,7 +11,7 @@ sysName=`uname`
 install_tmp=${rootPath}/tmp/mw_install.pl
 
 
-version=8.0.2
+version=8.0.3
 PHP_VER=80
 Install_php()
 {

plugins/php/versions/phplib.conf

@@ -48,6 +48,29 @@
         "shell": "opcache.sh",
         "check": "opcache.so"
     },
+    {
+        "name": "openssl",
+        "versions": [
+            "56",
+            "71",
+            "72"
+        ],
+        "type": "通用扩展",
+        "msg": "SSL!",
+        "shell": "openssl.sh",
+        "check": "openssl.so"
+    },
+    {
+        "name": "mcrypt",
+        "versions": [
+            "71",
+            "72"
+        ],
+        "type": "通用扩展",
+        "msg": "加密软件!",
+        "shell": "mcrypt.sh",
+        "check": "mcrypt.so"
+    },
     {
         "name": "pcntl",
         "versions": [

plugins/simdht/class/simdht_mysql.py

@@ -7,7 +7,7 @@ import sys
 sys.path.append("/usr/local/lib/python2.7/site-packages")
 
 
-class mysql:
+class simdht_mysql:
     __DB_PASS = None
     __DB_USER = 'root'
     __DB_PORT = 3306

plugins/simdht/index.py

@@ -24,7 +24,7 @@ def getPluginDir():
     return mw.getPluginDir() + '/' + getPluginName()
 
 sys.path.append(getPluginDir() + "/class")
-import mysql
+import simdht_mysql
 
 
 def getServerDir():
@@ -216,7 +216,7 @@ def getDbConfInfo():
 
 def pMysqlDb():
     data = getDbConfInfo()
-    conn = mysql.mysql()
+    conn = simdht_mysql.simdht_mysql()
     conn.setHost(data['DB_HOST'])
     conn.setUser(data['DB_USER'])
     conn.setPwd(data['DB_PASS'])
@@ -271,7 +271,7 @@ def getTrendData():
         three = getMinData(pdb, 10)
         return mw.getJson([one, two, three])
     except Exception as e:
-        print str(e)
+        # print str(e)
         return mw.getJson([0, 0, 0])
 
 

plugins/sphinx/tpl/simdht_delta.conf

@@ -4,7 +4,7 @@
 
 indexer
 {
-	mem_limit		= 32M
+	mem_limit		= 128M
 }
 
 searchd
@@ -39,9 +39,7 @@ source search_hash
     sql_range_step  = 1000
 
 	sql_query_pre   = SET NAMES utf8
-	sql_query		= \
-		SELECT id, name, CRC32(category) AS category, length, UNIX_TIMESTAMP(create_time) AS create_time, UNIX_TIMESTAMP(last_seen) AS last_seen\
-		FROM search_hash where id >= $start AND id <= $end AND is_has=1
+	sql_query		= SELECT * from ( SELECT s1.id id, s1.name name, s1.category category, s1.length length, UNIX_TIMESTAMP(s1.create_time) as create_time, UNIX_TIMESTAMP(s1.last_seen) as last_seen, s2.file_list file_list, s1.info_hash info_hash FROM search_hash s1 left join search_filelist s2 on s1.info_hash=s2.info_hash where s1.is_has=1 and s1.id >= $start AND s1.id <= $end  ) as s WHERE s.file_list is not null
  
 	sql_attr_bigint		= length
 	sql_attr_timestamp	= create_time
@@ -53,7 +51,7 @@ source search_hash_delta : search_hash
 {
 	sql_query_range = SELECT (SELECT max_doc_id FROM `sph_counter` where counter_id=1) as min, (SELECT max(id) FROM search_hash) as max
     sql_query_pre = SET NAMES utf8
-    sql_query = SELECT id, name, CRC32(category) AS category, length, UNIX_TIMESTAMP(create_time) AS create_time, UNIX_TIMESTAMP(last_seen) AS last_seen FROM search_hash where id >= $start AND id <= $end AND is_has=1
+    sql_query = SELECT * from ( SELECT s1.id id, s1.name name, s1.category category, s1.length length, UNIX_TIMESTAMP(s1.create_time) as create_time, UNIX_TIMESTAMP(s1.last_seen) as last_seen, s2.file_list file_list, s1.info_hash info_hash FROM search_hash s1 left join search_filelist s2 on s1.info_hash=s2.info_hash where s1.is_has=1 and s1.id >= $start AND s1.id <= $end  ) as s WHERE s.file_list is not null
     sql_attr_bigint		= length
 	sql_attr_timestamp	= create_time
 	sql_attr_timestamp	= last_seen

plugins/ssh-no-login/check-ssh.sh

@@ -0,0 +1,21 @@
+#! /bin/bash
+#禁止弱口令登录改良版
+
+cat /var/log/secure|awk '/Failed/{print $(NF-3)}'|sort|uniq -c|awk '{print $2"="$1;}' > black.txt #尝试登录的次数和ip
+
+DEFINE="5"  #单个ip尝试登录最大值
+
+for i in `cat /root/black.txt`
+do
+
+    IP=`echo $i |awk -F= '{print $1}'`
+    NUM=`echo $i|awk -F= '{print $2}'`
+
+    if [ $NUM -gt $DEFINE ]; then
+        grep $IP /etc/hosts.deny > /dev/null
+
+        if [ $? -gt 0 ]; then
+            echo "sshd:$IP" >> /etc/hosts.deny  #扔到hosts文件中
+        fi
+    fi
+done

plugins/zimg/index.html

@@ -0,0 +1,19 @@
+<div class="bt-form">
+	<div class="bt-w-main">
+		<div class="bt-w-menu">
+			<p class="bgw" onclick="pluginService('zimg');">服务</p>
+			<p onclick="pluginInitD('zimg');">自启动</p>
+			<p onclick="pluginConfig('zimg');">配置修改</p>
+			<p onclick="pluginLogs('zimg','','run_log');">运行日志</p>
+			<p onclick="readme();">说明</p>
+		</div>
+		<div class="bt-w-con pd15">
+			<div class="soft-man-con"></div>
+		</div>
+	</div>
+</div>
+<script type="text/javascript">
+$.getScript( "/plugins/file?name=zimg&f=js/zimg.js", function(){
+	pluginService('zimg');
+});
+</script>

plugins/zimg/index.py

@@ -0,0 +1,189 @@
+# coding:utf-8
+
+import sys
+import io
+import os
+import time
+import shutil
+import subprocess
+
+sys.path.append(os.getcwd() + "/class/core")
+import mw
+
+app_debug = False
+if mw.isAppleSystem():
+    app_debug = True
+
+
+def getPluginName():
+    return 'zimg'
+
+
+def getPluginDir():
+    return mw.getPluginDir() + '/' + getPluginName()
+
+
+def getServerDir():
+    return mw.getServerDir() + '/' + getPluginName()
+
+
+def getInitDTpl():
+    path = getPluginDir() + "/init.d/zimg.tpl"
+    return path
+
+
+def getArgs():
+    args = sys.argv[2:]
+    tmp = {}
+    args_len = len(args)
+
+    if args_len == 1:
+        t = args[0].strip('{').strip('}')
+        t = t.split(':')
+        tmp[t[0]] = t[1]
+    elif args_len > 1:
+        for i in range(len(args)):
+            t = args[i].split(':')
+            tmp[t[0]] = t[1]
+
+    return tmp
+
+
+def initDreplace():
+
+    file_tpl = getInitDTpl()
+    service_path = os.path.dirname(os.getcwd())
+
+    initD_path = getServerDir() + '/init.d'
+
+    file_bin = initD_path + '/' + getPluginName()
+    if not os.path.exists(initD_path):
+        os.mkdir(initD_path)
+
+        # initd replace
+        content = mw.readFile(file_tpl)
+        content = content.replace('{$SERVER_PATH}', service_path)
+        mw.writeFile(file_bin, content)
+        mw.execShell('chmod +x ' + file_bin)
+
+    return file_bin
+
+
+def checkArgs(data, ck=[]):
+    for i in range(len(ck)):
+        if not ck[i] in data:
+            return (False, mw.returnJson(False, '参数:(' + ck[i] + ')没有!'))
+    return (True, mw.returnJson(True, 'ok'))
+
+
+def status():
+    cmd = "ps -ef|grep zimg |grep -v grep | grep -v 'mdserver-web'| awk '{print $2}'"
+    data = mw.execShell(cmd)
+    if data[0] == '':
+        return 'stop'
+    return 'start'
+
+
+def start():
+    file = initDreplace()
+    data = mw.execShell(file + ' start')
+    if data[1] == '':
+        return 'ok'
+    return data[1]
+
+
+def stop():
+    file = initDreplace()
+    data = mw.execShell(file + ' stop')
+    # print data
+    if data[1] == '':
+        return 'ok'
+    return data[1]
+
+
+def restart():
+    file = initDreplace()
+    data = mw.execShell(file + ' reload')
+    if data[1] == '':
+        return 'ok'
+    return data[1]
+
+
+def reload():
+    file = initDreplace()
+    data = mw.execShell(file + ' reload')
+    if data[1] == '':
+        return 'ok'
+    return data[1]
+
+
+def getPathFile():
+    return getServerDir() + '/bin/conf/zimg.lua'
+
+
+def getInitDFile():
+    if app_debug:
+        return '/tmp/' + getPluginName()
+    return '/etc/init.d/' + getPluginName()
+
+
+def initdStatus():
+    if not app_debug:
+        if mw.isAppleSystem():
+            return "Apple Computer does not support"
+    initd_bin = getInitDFile()
+    if os.path.exists(initd_bin):
+        return 'ok'
+    return 'fail'
+
+
+def initdInstall():
+    source_bin = initDreplace()
+    initd_bin = getInitDFile()
+    shutil.copyfile(source_bin, initd_bin)
+    mw.execShell('chmod +x ' + initd_bin)
+
+    if not app_debug:
+        mw.execShell('chkconfig --add ' + getPluginName())
+    return 'ok'
+
+
+def initdUinstall():
+    if not app_debug:
+        mw.execShell('chkconfig --del ' + getPluginName())
+
+    initd_bin = getInitDFile()
+
+    if os.path.exists(initd_bin):
+        os.remove(initd_bin)
+    return 'ok'
+
+
+def getLog():
+    return getServerDir() + '/bin/log/zimg.log'
+
+
+if __name__ == "__main__":
+    func = sys.argv[1]
+    if func == 'status':
+        print status()
+    elif func == 'start':
+        print start()
+    elif func == 'stop':
+        print stop()
+    elif func == 'restart':
+        print restart()
+    elif func == 'reload':
+        print reload()
+    elif func == 'conf':
+        print getPathFile()
+    elif func == 'initd_status':
+        print initdStatus()
+    elif func == 'initd_install':
+        print initdInstall()
+    elif func == 'initd_uninstall':
+        print initdUinstall()
+    elif func == 'run_log':
+        print getLog()
+    else:
+        print 'error'

plugins/zimg/info.json

@@ -0,0 +1,15 @@
+{
+	"title":"zimg",
+	"tip":"soft",
+	"name":"zimg",
+	"type":"其他插件",
+	"ps":"轻量级图片服务器软件",
+	"versions":"1.0",
+	"shell":"install.sh",
+	"checks":"server/zimg",
+	"path": "server/zimg",
+	"author":"midoks",
+	"home":"https://github.com/buaazp/zimg",
+	"date":"2021-04-13",
+	"pid": "5"
+}

plugins/zimg/init.d/zimg.tpl

@@ -0,0 +1,50 @@
+#!/bin/sh
+# chkconfig: 2345 55 25
+# description: zimg Service
+
+### BEGIN INIT INFO
+# Provides:          zimg
+# Required-Start:    $all
+# Required-Stop:     $all
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: starts zimg
+# Description:       starts the MDW-Web
+### END INIT INFO
+
+
+app_start(){
+	# aria2c -D
+	cd {$SERVER_PATH}/zimg/bin
+	./zimg -d {$SERVER_PATH}/zimg/bin/conf/zimg.lua </dev/null &>/dev/null
+	echo "zimg started"
+}
+app_stop(){
+	echo "Stopping ..."
+	arr=`ps -ef | grep "zimg" | grep -v 'grep' | grep -v '/bin/sh'|grep -v 'index.py' | awk '{print $2}'`
+	echo $arr
+	for p in ${arr[@]}
+    do
+		kill -9 $p &>/dev/null
+    done
+	echo "zimg stopped"
+}
+
+
+case "$1" in
+    start)
+		app_start
+        ;;
+    stop)
+        app_stop
+        ;;
+	restart|reload)
+		app_stop
+		sleep 0.3
+		app_start
+		;;
+    *)
+        echo "Please use start or stop as first argument"
+        ;;
+esac
+

plugins/zimg/install.sh

@@ -0,0 +1,73 @@
+#!/bin/bash
+PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin
+export PATH
+
+curPath=`pwd`
+rootPath=$(dirname "$curPath")
+rootPath=$(dirname "$rootPath")
+serverPath=$(dirname "$rootPath")
+
+
+zimgSourceDir=${serverPath}/source/zimg
+
+install_tmp=${rootPath}/tmp/mw_install.pl
+
+SYSOS=`uname`
+
+Install_libjpeg_turbo(){
+	mkdir -p $zimgSourceDir/libjpeg-turbo
+	cd $zimgSourceDir/libjpeg-turbo
+	if [ ! -d $zimgSourceDir/libjpeg-turbo ];then
+		wget https://downloads.sourceforge.net/project/libjpeg-turbo/1.3.1/libjpeg-turbo-1.3.1.tar.gz
+		tar zxvf libjpeg-turbo-1.3.1.tar.gz
+		cd libjpeg-turbo-1.3.1
+		./configure --prefix=/usr/local --with-jpeg8
+		make && make install
+	fi 
+}
+
+Install_zimg_source(){
+	mkdir -p $zimgSourceDir
+	cd $zimgSourceDir
+	if [ ! -d $zimgSourceDir/zimg ];then
+		git clone https://github.com/buaazp/zimg -b master --depth=1
+		cd zimg
+		make
+	fi
+	if [ -f $zimgSourceDir/zimg/bin/zimg ];then
+		cp -r $zimgSourceDir/zimg/bin $serverPath/zimg
+	fi
+}
+
+Install_zimg()
+{
+	isStart=""
+	echo '正在安装脚本文件...' > $install_tmp
+	mkdir -p $serverPath/zimg
+	echo '1.0' > $serverPath/zimg/version.pl
+
+	if [ "Darwin" == "$SYSOS" ];then
+		echo 'macosx unavailable' > $install_tmp
+	else
+		if [ ! -f $serverPath/zimg/bin ];then
+			yum install nasm -y
+			Install_libjpeg_turbo
+			Install_zimg_source
+		fi
+	fi
+
+	echo 'Install complete' > $install_tmp
+}
+
+Uninstall_zimg()
+{
+	rm -rf $serverPath/zimg
+	echo "Uninstall completed" > $install_tmp
+}
+
+action=$1
+if [ "${1}" == 'install' ];then
+	Install_zimg
+else
+	Uninstall_zimg
+fi

plugins/zimg/js/zimg.js

@@ -0,0 +1,92 @@
+function str2Obj(str){
+    var data = {};
+    kv = str.split('&');
+    for(i in kv){
+        v = kv[i].split('=');
+        data[v[0]] = v[1];
+    }
+    return data;
+}
+
+function lpPost(method,args,callback, title){
+
+    var _args = null; 
+    if (typeof(args) == 'string'){
+        _args = JSON.stringify(str2Obj(args));
+    } else {
+        _args = JSON.stringify(args);
+    }
+
+    var _title = '正在获取...';
+    if (typeof(title) != 'undefined'){
+        _title = title;
+    }
+
+    var loadT = layer.msg(_title, { icon: 16, time: 0, shade: 0.3 });
+    $.post('/plugins/run', {name:'aria2', func:method, args:_args}, function(data) {
+        layer.close(loadT);
+        if (!data.status){
+            layer.msg(data.msg,{icon:0,time:2000,shade: [0.3, '#000']});
+            return;
+        }
+
+        if(typeof(callback) == 'function'){
+            callback(data);
+        }
+    },'json'); 
+}
+
+function lpAsyncPost(method,args){
+    var _args = null; 
+    if (typeof(args) == 'string'){
+        _args = JSON.stringify(str2Obj(args));
+    } else {
+        _args = JSON.stringify(args);
+    }
+
+    var loadT = layer.msg('正在获取...', { icon: 16, time: 0, shade: 0.3 });
+    return syncPost('/plugins/run', {name:'l2tp', func:method, args:_args});
+}
+
+function userList(){
+    lpPost('user_list', '' ,function(data){
+        var rdata = $.parseJSON(data['data']);
+        
+        if (!rdata['status']){
+            layer.msg(rdata.msg,{icon:0,time:2000,shade: [0.3, '#000']});
+            return;
+        }
+        var list = rdata['data'];
+
+        var con = '';
+        con += '<div class="divtable" style="margin-top:5px;"><table class="table table-hover" width="100%" cellspacing="0" cellpadding="0" border="0">';
+        con += '<thead><tr>';
+        con += '<th>用户</th>';
+        con += '<th>密码</th>';
+        con += '<th>操作(<a class="btlink" onclick="addUser()">添加</a>)</th>';
+        con += '</tr></thead>';
+
+        con += '<tbody>';
+
+        for (var i = 0; i < list.length; i++) {
+            con += '<tr>'+
+                '<td>' + list[i]['user']+'</td>' +
+                '<td>' + list[i]['pwd']+'</td>' +
+                '<td><a class="btlink" onclick="modUser(\''+list[i]['user']+'\')">改密</a>|<a class="btlink" onclick="delUser(\''+list[i]['user']+'\')">删除</a></td></tr>';
+        }
+
+        con += '</tbody>';
+        con += '</table></div>';
+
+        $(".soft-man-con").html(con);
+    });
+}
+
+
+
+function readme(){
+    var readme = '<ul class="help-info-text c7">';
+    readme += '<li>使用时，查看对应的端口</li>';
+    readme += '</ul>';
+    $('.soft-man-con').html(readme);
+}

requirements.txt

@@ -1,21 +1,23 @@
 werkzeug==0.16.1
 setuptools==33.1.1
-wheel
+wheel==0.33.6
 flask==1.0.2
 flask-session==0.3.2
-flask-socketio
 flask-helper==0.19
 cache==1.0.3
 flask-caching==1.8.0
 gunicorn==19.9
 gevent==1.3.7
 gevent-websocket
-psutil
-pillow
-chardet
-flask-sqlalchemy
-requests
-ConfigParser
+psutil==5.6.6
+pillow==6.2.2
+chardet==3.0.4
+flask-sqlalchemy==2.3.2
+cryptography==3.3.2
+requests==2.20.0
+ConfigParser==3.5.0
 MySQL-python==1.2.5
 mysql-connector-python
+flask-socketio==3.0.1
+python-engineio==3.9.0
 # pytest-shutil

scripts/install_centos.sh

@@ -67,7 +67,7 @@ fi
 systemctl stop firewalld
 
 
-yum install -y libevent libevent-devel mysql-devel libjpeg* libpng* gd* zip unzip
+yum install -y libevent libevent-devel mysql-devel libjpeg* libpng* gd* zip unzip libmcrypt libmcrypt-devel
 
 if [ ! -d /www/server/mdserver-web ];then
 	wget -O /tmp/master.zip https://codeload.github.com/midoks/mdserver-web/zip/master
@@ -87,7 +87,7 @@ yum -y install MySQL-python
 yum -y install epel-release
 
 if [ ! -f '/usr/bin/pip' ];then
-	wget https://bootstrap.pypa.io/get-pip.py
+	wget https://bootstrap.pypa.io/pip/2.7/get-pip.py
 	python get-pip.py
 	pip install --upgrade pip
 fi 

scripts/update_centos.sh

@@ -17,7 +17,7 @@ rm -rf /tmp/master.zip
 rm -rf /tmp/mdserver-web-master
 
 
-yum install -y curl-devel
+yum install -y curl-devel libmcrypt libmcrypt-devel
 
 cd /www/server/mdserver-web/scripts && sh lib.sh
 pip install -r /www/server/mdserver-web/requirements.txt